Description
On your key, see if you have the letter "H" on the top of the metal part, if you do then you have an H key.
Details:
- NO DEALER ACTIVATION REQUIRED.
- 99% Plug & Play - 2 wire connection.
- Printed color instructions included.
- Complete Kit - nothing else needed.
- Compatible with our Long Range Remote Kits.
- Compatible with our Smart Phone Module.
Requirements:
- 2016-2023 Toyota Tacoma.
- Key Start Ignition.
Operation:
- To Start: Press the lock button 3 times on the factory key FOB.
- To Stop: Press the lock button 3 more times while the engine is on.
- Parking Lights will illuminate.
- Run Time is 15 minutes.
- All doors and hood must be closed.
- Vehicle must be put into "Ready Mode" by putting a foot on Brake pedal, Shifter into Neutral, E-Brake up, Foot off Brake pedal, Turn ignition off, open the door, exit the vehicle, close the door, and lock. Opening up any door after this will take the vehicle out of ready mode.
Special notes:
- If your vehicle has a TPMS system, you will need to cut one wire, TPMS will still function.
- (Manual) You will also need to tap (NOT CUT) your Clutch Cancel wire. Instructions provided.
- All wire and hardware interfacing is provided.
- The vehicle will NOT shut off when a door is opened.
- You will be able to get into the vehicle after a remote start, put the key into the ignition, turn the ignition two clicks to ON position, tap the brake pedal, and now your key is in control and you can drive off!