You will have two options for the style of tray to mount your blue sea 12 circuit fuse block.
1. Original 12 circuit PowerTray:
- The Blue Sea 12 Circuit PowerTray provides a base station for wiring in all your aftermarket accessories.
- This product is for the Original Blues Sea 12 Circuit PowerTray, support leg, and mounting hardware.
2. Essentials 12 circuit PowerTray:
- This option is the same as the Original 12 Circuit PowerTray seen above, minus the circuit breaker. Its a simple, compact solution to mount your Blue Sea 12 Circuit Fuse Block so you can keep your wiring clean and organized.
- There is no support leg included with this tray since the mounting platform is smaller allowing for an easier and more cost effective install of your fuse block.
- This product is for the Essentials Blues Sea 12 Circuit PowerTray and mounting hardware.
- 1/8th Inch 5052 Aircraft Aluminum - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.
- Waterjet manufacturing - Guarantees precise cuts with an accuracy of ±0.003", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
- Chamfered edges - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.
- Perfect fit - The fender-side bend is bent an additional 10° to match the angle of the factory threaded M8 holes to ensure a level mounting surface.
- Unparalleled stability - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.
- High Quality JIS Class 10.9 Steel Hardware - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.
- Power Made Easy - Delivered right to your door with step-by-step installation instructions.
This PowerTray will fit 2nd & 3rd Gen Toyota Tacoma's (2005-Current) with the following requirements:
- Both electric assist and vacuum boosted.
- This tray will work with all 05-Current Toyota Tacoma's regardless of model.
- Automatic transmissions or manual transmissions that do not have the fender-mounted clutch fluid reservoir.
- Unfortunately PowerTrays will not work with the fender-mounted clutch fluid reservoir (which include the majority of Tacoma's prior to 2020) due to the reservoir being mounted in the same location the PowerTray installs.
- So if your Tacoma has a manual transmission and has this reservoir bolted to the inner fender, then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model of your Tacoma so we can go over options for relocating the reservoir.
- Superchargers: Unfortunately most supercharged Tacomas have an Air To Water reservoir mounted in the same area the PowerTray is designed to install. So you would need to either relocate that reservoir or you could purchase the Standoff version of this tray and mount it on top of the Factory fuse block lid.