Please note that bundles are not eligible for discount codes or further markdowns.
Warn - EVO 10-S Winch Description
Ideal weight capacity and line speed for 1/2-ton pickups, Jeeps, and larger SUVs. The VR EVO 10 features IP68-rated waterproof construction, an ultra-reliable Albright® contactor inside a relocatable control pack, and a state-of-the-art, two-in-one remote for added ease of use and versatility.
Please Note: This product requires a compatible bumper or mounting plate to be properly mounted to your vehicle.
Part Number: 103253
Factor 55 - Fairlead Description
Factor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 and 1.5 fairleads are CNC machined from 1 and 1.5 inches thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick.
The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The 1.0 and 1.5 fairleads are the industry’s first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles.
The rope slot height opening is taller to allow the larger ½” tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension “suck down” device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo.
What is the best surface finish for Hawse aluminum fairleads? Without a doubt, it is a Type III hard-anodized coating. Not cosmetic Type II anodized finishes, not powder coated, and not raw or polished aluminum. Why? Because a hard coating can resist the abrasion damage from a dirty/gritty synthetic winch rope rubbing across it. Especially during extreme side pulls where rope fiber stresses are extremely high. A Mil-A-8625 Type III hard-anodized finish leaves a .002” thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind (See chart under Corundum/Sapphire). Not too far away from diamond hardness actually. Another valuable material property from hard anodized coatings are the low coefficients of friction. Low friction = lower rope heat. Only drawback? Hard anodizing is not offered in typical bright and fancy anodized colors. All Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope.
Overall dimension: 12.35″ x 3.25″.
Standard 10″ bolt mount spacing.
For synthetic winch rope only.
NOTE - Fairleads DO NOT come with mounting hardware.
The reason for this is depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch. In most cases, the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length. In some cases, longer bolts are required and 3/8″ Grade 5-Grade 8 bolts in 1.25-1.5″ shank length is a good starting point for fitment. 7/16″ bolts may also be used. Please contact us for any specific questions.
Made in the USA.
Overland Vehicle Systems - Combo Pack Description
OVS Soft Shackle Combo Pack containing Soft Shackle 7/16" 41,000 lb. with Loop & Abrasive Sleeve - 23" with Storage Bag and Recovery Ring 4.00" 41,000 lb. Gray With Storage Bag Universal is the ultimate must-have for your Overland or Off-Road rig. Looking for a safe and reliable way to recover your vehicle when off-roading? Look no further than the Combo Pack Soft Shackle 7/16" 41,000 lb. and Recovery Ring 4.0" 41,000 lb. This set is perfect for those who want to be prepared for anything while out on the trails. The soft shackle is made of Dyneema, which has a much higher strength-to-weight ratio than steel, making it perfect for off-road recovery. The recovery ring is also made of 41,000 lb. rated material, so you can be confident in its ability to get your vehicle back on the trail. Together, these two pieces form a safe and reliable system that will help you get back on the trail quickly and safely. With this set, you'll have everything you need for a safe and successful off-road recovery. Order yours today and be prepared for anything the trails throw your way. Safe off-road recovery is possible with the Combo Pack Soft Shackle 7/16" 41,000 lb. and Recovery Ring 4.0" 41,000 lb.!
Soft Shackle 7/16" 41,000 lb. with Loop & Abrasive Sleeve - 23"
All OVS soft shackles feature Dyneema, a low-friction fiber, so braided synthetic line will run easily through soft shackles, meaning you can often get away without using a traditional snatch block for applications where standard recovery isn’t enough. Dyneema rope is so strong that an equivalent wire rope would be three times as thick, and a top-quality stainless steel shackle with a 3/4in pin would have less than half the breaking strength. Our soft shackle can handle just about every function performed by a metal shackle, in many cases better. Soft shackles articulate better, don’t rattle around when not under load, or beat up bumpers, easier to undo, and don’t have pins that fall out in the middle of a trail.
Ring 4.00" 41,000 lb. Gray with Storage Bag
The Overland Vehicle Systems Recovery Ring is designed to make a recovery safer, faster, and more reliable. Its unique design is manufactured out of T6 6061 Aircraft Grade aluminum which won’t rust or corrode. This simple recovery tool used in conjunction with a soft shackle replaces the traditional snatch blocks. It operates at a much higher working load which makes a recovery safer and easier. This unique system is safer than the outdated snatch blocks because it doesn’t store kinetic energy like traditional rigging, which could be catastrophic if a failure occurs.
Overland Vehicle Systems Off Road Recovery Difference
The Overland Vehicle Systems team knows that off road recovery can be a difficult and dangerous process. That's why we carry the Brute Kinetic Recovery Ropes and Soft Shackles, the Soft Shackles are perfect for use with the Brute Kinetic Recovery Ropes! The Recovery Rings come in 3 assorted sizes and offer a safer solution than standard Snatch Blocks. However, if you need something more traditional then feel free to check out the tow straps and tree saver. In addition to the standard d-rings, we also offer Snatch Blocks in two different capacities. We also offer two size recovery boards so whatever your off-road needs may be, we've got you covered. Lastly, we offer two different hitch receiver solutions, the Standard and the Aluminum Soft Shackle Ready Receiver mounts. All the offroad recovery products are rigorously tested so that you can feel confident using them in any situation. When it comes to off road recovery, the Overland Vehicle Systems team has you covered.